Description
- High Compatibility: The MTF-01 supports data output via uart, compatible with mainstream open-source flight control systems such as Ardupilot, PX4, and INAV. Users can switch communication protocols through the USB to UART TTL module, adapting to different flight control systems.
- Easy to Operate: Comes with comprehensive video tutorials that simplify the configuration process for quick and easy setup.
- Integrated High-Performance Sensors: Incorporates a PMW3901 optical flow sensor and a high-power TOF sensor, suitable for outdoor sunlight environments. It offers a ranging distance of 0.02-8m with 2% accuracy and effectively resists up to 70K Lux of ambient light.
- Lightweight Design, Strong Environmental Adaptability: Weighing only 4.5g and measuring 29 * 16.5 * 15mm, it supports operating voltages of 4.0-5.5V and working temperatures from -10C to 60C, adaptable to a variety of environments.
Description
MTF-01 is an optical flow ranging integrated sensor developed by MicoAir Technology. It uses uart to output data and is compatible with mainstream open source flight controllers such as Ardupilot, PX4, and INAV. (You can freely modify the communication protocol between the sensor and the flight controller using the USB to UART TTL Module making it compatible with different flight controllers.). It can be used directly after simple configuration without complicated development process. MTF-01 features an integrated PMW3901 optical flow sensor and a high-performance TOF sensor, which can be used normally in outdoor sunlight environments.
Specification Product weight: 4.5g Product size: 29 x 16.5 x 15mm Output mode: UART Output frequency: 100Hz TOF Range: 0.02-8m Ranging dead zone: 2cm Range accuracy: 2% Wavelength: 830-870nm Resistance to ambient light: 70K Lux illumination Distance FOV: 6 Optical flow FOV: 42 Ambient light demand of optical flow: >60Lux Optical flow working distance: >80mm Power consumption: 500mW Operating voltage: 4.0-5.5V Operating temperature: -10C-60C USER MANUAL & Configurator Download MicoAssistant from here MicoAssistant_v0.9.13 Sensor Video Tutorials Setup Optic Flow&Lidar(MTF-01) For INAV Setup Optic Flow&Lidar(MTF-01) For Ardupilot&PX4 Sensor 3D file MTF_01 Optical Flow Lidar Sensor - GrabCAD Sensor Case (Designed by ROBOFUSION) MTF-01 Optical Flow Lidar Sensor Case - GrabCAD Sensor holder for GEPRC Cinebot30 (Designed by ROBOFUSION) Sensor holder for GEPRC Cinebot30 Sensor holder for 2inch FPV drone (Designed by ROBOFUSION) Sensor holder for 2inch FPV drone PACKAGE LIST MTF-01 module *1 20cm SH1.0 4PIN-4PIN cable * 1 20cm SH1.0-MX1.25-6P cable * 1 (for pixhawk2.4.8 20cm SH1.0-GH1.25-6P cable * 1 (for pixhawk4/5/6) *(If you purchase multiple MTF-01 Modules, we will only include one USB to UART TTL Module as it is not a part of the product's functionality. It is solely used for parameter configuration.)