Description
- The SkyStars Fly Stack features a F411 Mini HD Flight Controller and a Kramam 40A BLHeli_S 3-6S 4-in-1 ESC with a 20x20 mounting pattern.Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)VIDEO: (Insert Video Title here in Bold)FeaturesFCSolder pads are the largest in size compared to other mini FC in the market.Proper solder pad spacing to avoid solder bridges and facilitate easy soldering.TVS Diode for Rev
The SkyStars Fly Stack features a F411 Mini HD Flight Controller and a Kramam 40A BLHeli_S 3-6S 4-in-1 ESC with a 20x20 mounting pattern.Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)VIDEO: (Insert Video Title here in Bold)FeaturesFCSolder pads are the largest in size compared to other mini FC in the market.Proper solder pad spacing to avoid solder bridges and facilitate easy soldering.TVS Diode for Reverse Polarity Protection and Voltage Spike Suppression.Powerful BEC to supply all your electronics.The pad arrangement is executed in such a way that when you twist the wires of the camera VTX and RX you don't get any wire overlapping this gives you a uniform twist and clean look. connector on the bottom side, power supply by BAT.Two stages of Quality check to reduce any faulty electronic.No power lines near Gyro to avoid any EMI interference.USE BULLETED FEATURE HERE IN BOLD CAPS.Add additional feature descriptions here to describe the above.USE BULLETED FEATURE HERE IN BOLD CAPS.Add additional feature descriptions here to describe the above.SpecificationsF411Mini HD Betaflight Flight ControllerInput voltage: 3-6S LiPo(11.1V~22.2V)MCU: STM32F411IMU: BMI270 (SPI)OSD: AT7456E2 hardware UARTS (UART1,2)1 software UART3Receiver: CRSF/SBUS/IBUS/DSMBarometer: NOBuzzer Pad: YESCURR Pad: YESBEC 5V 2ABlackbox: 16MBFirmware: Betaflight SKYSTARS F411Mounting Holes: 20mm/M2Weight: 4.3gKO40 40A 4IN1 ESCInput voltage: 3-6S LiPoCon.Current: 40APeak Current:45A 10SFirmware: BLHeli_SSupport: Dshot 300/600Mounting holes : 20X20 mm/M2BEC: NoProduct size: 31*30*6.9mmWeight: 5.4gIMPORTANT NOTESInsert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."Recommended (Not Included) (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")Links (Insert links such as manuals, firmware, etc)Includ